what is the best way to remove melted candle wax from a carpet?
Answers:
Depends on what kind of wax it is..If it's white it should have no problem coming out, with no mess afterwards.If it is colored wax, you will have a stain left behind, by doing this procedure..
What you will need:
WAX PAPER
IRON
OLD TOWEL YOU NO LONGER NEED
Heat the IRON, place the wax paper over the melted wax, use the iron and lay it on the wax paper, and let it heat up.just enough to melt it,,,,remove the iron and wax paper, and then take the towel and scrub it...REPEAT and REPEAT as much as needed.Let me know it this works; p0
Other answers:
Go to an Illuminations store, they have an amazing wax remover. Illuminations.com
Go to an Illuminations store, they have an amazing wax remover. Illuminations.com
i did the same ****, i froze it as i was instructed to. picked all i could off then used a carpet cleaning spray for the rest it worked great
Take an ice cube and rub it over the wax. It should harden it and make it come up easily!
Cover the wax with a brown paper sack or several layers of paper towels. Then iron over the paper with a regular iron on a warm setting. Be careful not to get it too hot or you will melt the carpet. Warm is good enough. The heat will lift the wax out of the carpet fibers and on to the paper.
Use an extremely hot rag.
Pick as much wax as you can from the carpet.
Put blotting paper on the residual stain, and iron over it as hot as the carpet will allow (better test that in an inconspicuous corner). The blotting paper will absorb the melted wax. Repeat until no more wax grease is deposited on the paper.
Good luck!
Apply ice to it and then scrape it off with knife
use a burner
Take an ice cube and rub it over the wax. It should harden it and make it come up easily!
Cover the wax with a brown paper sack or several layers of paper towels. Then iron over the paper with a regular iron on a warm setting. Be careful not to get it too hot or you will melt the carpet. Warm is good enough. The heat will lift the wax out of the carpet fibers and on to the paper.
use ice and freeze it. Then pick it up off the carpet bits at a time is all you can do really. take a damp cloth and blot it over it and make sure the rest of it comes off.
Place paper towel of it, then a real towel and iron the real towel
The wax will heat up and then stick to the paper towel.
You need to change the paper towel quite often so you don't end up making a bigger mess..
Good luck!
Place a paper kitchen towel over the wax and gently apply heat with an electric domestic iron. The iron needs to be just warm enough to melt the wax, which will be drawn-off the carpet onto the kitchen towel. It won't all come off in one go, so repeat the process with clean sheets of paper towel until it has all been removed. MAKE SURE that the thermostat of the iron is set to a low setting. If it has a setting for silk, use that. If not use the setting for wool. DO NOT press down on the iron, just let it run lightly over the paper. If you press too hard you will drive the wax deeper into the pile. Be patient and it will all be removed.
One final thing. If the carpet is made of synthetic fibre or a mix of wool and synthetic fibre, do not allow the iron to come into direct contact with the pile. Even at a low temperature this can damage the fibre.
Use the edge of a butter knife to carefully scrape off or lift up as much solid wax as you can. Fill a zipper-type plastic bag with ice cubes and place the bag over any remaining wax. The cold will make the wax more brittle, enabling you to scrape off additional wax with the butter knife. Repeat this procedure as necessary to remove as much wax as possible. Be careful to not disturb the original condition of the fibers.
To remove any remaining wax, finish up using a warm iron. I highly recommend that you set the iron on a low heat and test the procedure first in a closet or other inconspicuous place. A synthetic carpet can melt if the iron is too hot.
Place a brown paper bag, several sheets of clean white paper, a white rag, or a white towel over the wax spill and iron over them using the warm iron. Keep moving the iron so you don’t get an iron-shaped burn mark in your carpeting, and move the absorbent paper or cloth so the wax melts onto a clean spot. When you see little spots that look like grease or water, you know the wax is lifting up out of your carpet.
Replace the absorbent paper or cloth as needed. You may have to repeat this process several times (using clean absorbent papers or cloths each time) to remove all of the wax from the carpet fibers. Work carefully; you don’t want to burn yourself or iron off the paper or cloth and melt the carpeting. Do not rush through this; it can be time-consuming, so be patient—it will remove the wax.
If small grease-like stains remain, sprinkle them with baking soda and let it sit overnight before vacuuming.