What does the off-putting "HF" on the HE4T Kenmore front nouns washer plan?
Answers: No water detected entering device or Pressure switch trip not detected.
If after 30 seconds the control does not detect river entering machine and next valves will be turned stale and the error code will be displayed.
Or
If the control has turned the river valves on and after 8 minutes the flow meter have detected 10.5 gallons of water ratification through it, but has not detected the pressure switch trip, the valve will be turned off and the error code will flash.
Press PAUSE/CANCEL twice to clear the display.
If in that is no water surrounded by the unit:
1. Make sure that both valve at the water source(s) are turned on adjectives the way.
2. Check for plugged or kinked inlet hoses or plugged screen in the inlet valve
3. Verify inlet valve operation
If at hand is water surrounded by the unit:
1. Verify Drain pump operation
2. Pressure Switch Hose is contained by good condition and properly connected to Tub and Pressure switch
Verify within is not a siphon problem
Verify wire harness connections to:Inlet Valves, Pressure Switch, Drain Pump, Flow Meter, and Central Control Unit (CCU)
Check adjectives hoses for possible leaks
Verify pressure switch operation
Verify flow meter operation
Verify CCU operation
More Questions and Answers...