Is nearby anything bar sugarsoap i can use to verbs my walls since drawing?
Answers: If the existing finish is a flat paint, you can simply use warm hose and elbow grease. If it's a satin/semi-gloss finish, definitely use TSP - along next to cleaning, it helps to slightly etch the finish, giving a better "tooth" for the fresh paint to adhere to.
Now if you've get any serious stains/discoloroation (including things like mark pens and crayons from any budding artitsts contained by the house), you should use a good hiding primer resembling KilzStain -- othewise there's a good fate the marks will telegraph through the unmarked paint.
TSP (tri-sodium-phospate works great. Wear gloves, though.
Use water?
Any household cleaner eg such as flash
wash up liquid is merely as good next to a dash of elbow grease basically rinse afterwards.
Any cleaner that does not leave a residue or have a detergent base. These would be similar to those that do not require rinsing, 409, Simple Green, Folex, or even a mix of baking soda dissolved in some hose will do in a pinch. I would use zilch that foams, like dish soap, because the detergent will affect the latex paint adherence.
Sugar soap dissolves the grease and have asked this myself, short answer is No.
Things like wash up liquid and flash or any other stuff i.e. for cleaning will leave a residue even after rinsing. Sugar soap comes rotten easily near water.
For best results after sugar soap, agree to it dry and get a fine particle sand paper and bestow the surface a rub all over to make available the new surface a switch to adhere to.
More Questions and Answers...