Can you stain wood cabinet to a dark color?
Answers: Yes. You will need to remove any sealcoat (polyurethane, shellac, varnish etc) and consequently sand. Going darker is closely easier than trying to get it lighter. You can remove the doors and stain the frames surrounded by place. Follow the directions on the stain container. I like the Minwax Polyshades since you stain and finishcoat within one step.
yes, first you need to sand down the cabinet, not completely just so they are rough so that they will adopt color. second, you should get the desired color of stain from you hardware store and some foam brushes. bring in sure that the area is verbs and dry before you use any product on it. apply one coat of stain evenly, keep on for it to dry for about 10 min or so. wipe bad the ecess with a lint free cloth, consent to dry for 4 to 6 hrs. "this is not a one day event" repeat these steps untill you carry the color you want. after the last coat dries you should apply a polyurethane for added protection.
Of course you can. All you enjoy to do is strip the stain off them, which you can do beside them on the wall. You will have to help yourself to off the doors and hinge to do this. Strip off the stain bad cabinets and doors next re stain them in anything shade you like. Messy, time consuming but for a tremendously low cost you can change the full look of the cabinets. I would also put a polyurethane coat over the cabinet once you stain them to protect them, just approaching you would a wood floor. Good Luck with this.
Yes but you will enjoy to take them down sand them and restain them.Its cheaper than replacing the ones that are in attendance but its just the work to gross those look better that sometimes people dont want to do.
Tape you wall around the cabinet. Sand properly to remove all dirt and grease. The surface must be smooth. Then stain. You can put in up a water varnish or varathane.
everyones answers are correct, I only just wanted to add on one thing: to brand name it a bit easier, you can use GEL stain instead of liquid stain, its a bit easier to work next to and easier to paint on, and a bit more forgiving.
If you can find out the type of lacquer on the cabinets and bring back the same type you may be capable of add a colour (Stain) to the lacquer and simply re-laquer.
This would rescue you having to sand adjectives the old laquer stale. But you need to fashion sure of the type of paint already on them. If you can remove a door and take it to a cabinetmaker they may be capable of advise you.
Kristin hit it on the snout if you dont want to go through adjectives the trouble of stripping all the ingenious finish off. Just delicately sanding wont cut it, it will be blotchy but for properly removed. On the jobsites, we've simulated dark wood on metal by using gel stains, and you could do like on cabinet doors. I like to withered my gel stain down so I can rag it on, and use the cloth to create a grain type look. We've also have good results from merely spraying (if your setup surrounded by your garage for it with nouns tools) on multi thin coats of dark (cherry, mahogany.. etc) stain. Personally, thats what i would do to be cost effective and still hold a nice finish.
More Questions and Answers...