What is the best means of access to for good remove mold from your bathroom?
Answers: Anything you do to cover the walls is a tie aid fix at best. Nothing will be a permanent fix for the walls until you fix the exposure to air problem. I assume you are allowing plenty of time for the fan to do it's mission. Fans do not work instantaneously, they require time to vent moisture from the room. For example a 100 cfm fan will swap 100 cubic foot of air per minute. But you involve to remember that the new nouns entering the space is mixing with the humidity air. It will rob a considerable amount of time to remove all of the moisture. Especially if you delight in a very hot shower close to I do. If the fan doesn't give the impression of being to do the trick, I suspect one or more of the following problems exist.
1. It may be clogged with years of dirt, dust, hairspray, etc.
2. It could be undersized for the cubic footage that it requests to service.
3. It may not vent to the outdoors. If it vents into the space between the rafter, which I have see, the damp nouns has no place to travel and it will eventually cause mold between the rafter as well. You entail to turn off the breaker for the supporter and pull it out to see if in that is alot of dirt buildup in the adherent and the duct, assuming there is a duct present. Measure your room. Multiply length X length X height. This will provide you the cubic footage of the room. Take that figure to your local hardware store and put in the picture them you need a supporter that will adequately expose a room of this size that has persistent mold problems.
I've found one thing to prevent mold from bleeding thru. An infirm painter gave me this.
When the wall is dry, paint first next to aluminum paint, then paint over the aluminum. Available contained by spray cans or quarts.
It have worked for me inside and outside.
It needs to be ventilate.
More Questions and Answers...