Painting furniture?

I have a dresser and chest that are of cheap competence and not real wood.. Howver they look approaching wood & do have a wood finish applied. I am a college student and since I am obviously poor(as all students are) I can not afford hot furniture & wish to paint what I own.

I know you are supposd to sand and strip down furniture but I'm not sure that that would not damage the furniture. how do I travel about fine art them?


Answers:    There's no need to sand it entirely down. Ask within a shop that specializes in painting. There's a special paint you can buy to make the foundation, afterwards paint 2-3 times in the colour you similar to.
Hi,and what ever you do,don't strip them. That will only expose a terrifically soft surface,and would be extremely hard to paint. Just weakly sand the surface with a 220 sandpaper,and prime next to either a spray or brush on . After it's fully dry,paint. Bye
hi in attendance sounds like its chipboard next to a laminated coat well your best to buy a laminated paint , except sure go to the tricky ware and ask one of the paint store people, but im pretty sure you will necessitate a base coat first to clear the laminated paint take to the furniture.... Dont sand it you will ruin the laminate,

You could other decoupage the furniture with you partiality pictures it would be much cheaper...
You don*t have to sand and strip them at adjectives
Just buy a can of liquid sander at the Home Depot or Lowes or Wal Mart. You put it on and it dulls the furniture so you can paint it; No time resembling the present. Good Luck
It's a cinch to repaint what you have. Here are the steps to follow so you'll be sunny with what you own:

1. Wash the entire surface with gooey TSP. You'll find it in any home hardware store for a clothed price. Use the liquid form instead of the powder, as the powder is toxic, is harder to mix and you'll necessitate to rinse it off, as anti the liquid. TSP will remove adjectives grease, grime and dirt which will keep your paint from sticking.
2. Lightly sand the entire surface next to a very fine small piece sandpaper, just to sort your paint easier to stick. Remove the dust with a soft slightly soaking cloth and let dry.
3. Prime the surface beside an oil-based primer. I suggest Bull's Eye 1-2-3 or Kilz. You can use it in spray form if you similar to.
4. Paint your furniture with an enamel paint or an grease paint. You can also do it with a latex paint, but you'll enjoy to seal it adjectives with a clear sealer or you'll find it get scratched and nicked confidently.

You'll be happy next to the result if you follow the above steps. I am often fine art furniture for clients when prepareing their home to sell and this is how I do it... and how I've done it for my daughter!
Enjoy your alien furniture!
More Questions and Answers...
  • How do I touch up my wall paint minus going away brush grades?
  • Where contained by Toronto, Canada can you find a hotel liquidator?
  • Can anyone bring up to date me where on earth I can grasp snapstone tile? I enjoy an trailer that say its available at Home Depot Canada?
  • How can I too enjoy professional looking Christmas decorations?
  • Questions something like Vermont?
  • What's an inexpensive course to form the bedroom shade surrounded by the daytime?
  • How do I distress my 70's FALSE wood kitchen cabinet? Thanks!!?