What is the easiest path to remove mirrors that hold be glue to the wall?
Answers: If you haven't busted up adjectives of the mirrors yet, run a sheet of clear contact treatise over them. Then take your sledge hammer and break up the mirrow. The contact paper will allow you to verbs the broken glass sour neatly and confidently. If there are still globs of dried paste use a palm sander starting with a coarse grit sandpaper. Re-sand using a finer grit sandpaper. That should do the trick.
ably that depends on what's on the wall around it.
if it's just paint, and no wall-paper, you can win some wallpaper removing spray-on stuff that will probably disolve the glue, the trick is getting it contained by there. beside wallpaper you scratch it up so the solvent can carry to all the cement, but with a mirror....harder to do.
what concerned of wall is it? if you have ample of these things to do, you MAY want to consider just adjectives out sections of the wall and redo them.
But if you stick with the "shatter and scrape" style, try newly a really wide scrapper and knock the handle beside the hammer should increase your results (or at least relieve your wrist a bit)
If you are shattering and removing that agency, taping the front of the mirror (or covering next to plastic/tarp and taping that surrounded by place) will help minimize mess.
What we did be to work a metal scraper behind a corner of the mirror squares and pry it rotten. Some came sour in one piece, some contained by many - we tape the front of it first and put down a tarp just within case. Then we used the scraper, Goo Gone, and a sander to draw from the adhesive sour the wall.
Good luck! (:
More Questions and Answers...