How unyielding is stripping painted trim work?
Has anyone done this, any specific products that are better than others? Any special tools needed?
What nearly the stair spindels, how would you go something like stripping them? I don't really want to have to thieve them apart.
Answers: I completely stripped a 1906 pre-craftsman house. DO NOT SAND! You definitely own lead paint within there. I would use CitriStrip and ReadyStrip for the opportunity. Citristrip works better on latex paint, the ready strip on head.
Use good gloves and plastic scrapers until the severely end when you'll necessitate some dental-type tools to get the ending bits out.
Also, don't use a heat gun unless you know what you're doing. Heat + front paint = lead gas.
There is also a hurricane lantern you can get that I haven't tried, but it supposedly heat the paint to the point where it comes stale but not hot enough to vaporize.
Good Luck!
In your situation I contemplate it would be most advisable to sand the paint off. It might pocket awhile though.
Just get sandpaper if you want to do it the thorny way, or in attendance are different sanding attachments you can append to power tools.
Another way to strip paint is roast. You can use a blowtorch to heat the paint, and next it is easily scraped rotten.
The last possibility is using chemicals. You could usually hire a company to dip the painted pieces into a special chemical container but obviously you can't unattach the trim to dip it. You could procure a special DIY chemical stripping kit but it can be really expensive.
Good luck!
This is a project that will take profoundly of time. If you have the time I totally respect you trying to retain the integrity of the home.
I usually use a gel paint stripper. Scrape sour what you can with a spackle cut. Then use steel wool to get paint out of cracks. Then sand it. I would pick the most influential thing you would approaching to see refinished. I would choose door or trim work by floor, cause the window are going to have curtains contained by front of them anyway. After that you will be able to resolve if you want to go further near it. Good Luck
This sounds like a career for professionals. Yes, you can strip the wood, but you will have to lift the baseboards and other trim off surrounded by order to do the opening well. If you own them come in and remove and strip professionally, you will hold a PERFECT job...guaranteed to restore the glory to your Victorian home. DIY is great, but beside the age of your home and its woodwork, I wouldn't try...
It's a pain within the neck! Quite labor intensive & time consuming. I hold a 1920s Arts & Crafts style home & one of the previous owners painted the trim in the kitchen, living & dining rooms white. I used Citristrip on the trim contained by the kitchen. A lot of it did come off next to that, but still a lot of paint remains contained by the crevices. I relented & just painted them again.
More Questions and Answers...