What's best procedure for preparing wood stained paneled walls to be painted? What type paint should be used



Answers:
I've tried just about everything but I've only found one method which really works to get paint to stick to varnish. First, sand the surface. Then, saturate a rag with liquid sandpaper and rub the surface until you feel it start to bite. Then brush on a coat of alkyd primer thinned with liquid sandpaper. The action of the brush over the surface helps work the primer in creating a bond. At this point you can top coat it however you like.

The sanding gives you a mechanical bond, and the liquid sandpaper gives you a chemical bond.

This system is much more labor intensive that the other systems which have been suggested, but ultimately all those other systems fail. There are all sorts of products which claim to work without sanding, and they'll work well enough to hold themselves. But as paint dries, it shrinks, which puts tension on the previous coat. Each coat of paint increases the tension until finally the point of weakest adhesion breaks loose.

Other answers:
Don't know try these:
Don't know try these:
wash the walls with a powdered cleaner called TSP & prime the wall with primer made for paneling then paint with a latex paint.
Clean the walls, prime with Kilz, then paint
Clean with TSP...
Prime with KILZ (water-based)...
Latex paint will work fine...
These are the same methods, that I always use.
I used steel wool and Liquid Sandpaper to prep mine then primed with Kilz.
Supply's

1.) Murphy oil for cleaning = $ 5.00 or Nox gloss = $ 20.00
2.) 3inch all purpose brush = $ 15.00
3.) Roller set up 3/4 nap, metal screen, 5 gallon bucket, rollor handle, 6ft pole = cheapest = $25.00
4.) 10x10 8ft wall's # 1 gallon Kitz oil pigmented = $ 10.00
Must put 2 coat's
5.) 120 grit sandpaper = 25 cent's a sheet
6.) Drop cloth ( runner ) rubber back curtain's will do fine maybe find some at Good Will or Twirft Store = Cheapest
7.)10x10 8ft wall finish coat # 1 gallon suggest eggshell washable paint = $ 17.00
8.) Thinner = $ 3.00 a gallon
9.) # 1 gallon work pot = $ 1.00


Clean wall's first and sand lightly between coat's of primer (2) coats primer than paint your wall's one at a time and than carry on. One hour dying time apart.

Sherwin Williams own's nearly ever paint company in the U.S.A. they just never changed label's including Wal-Mart's they will stand behind there warranty's.

Finish coat (2) coat's
  • How do you install a ceiling fan on a slant ceiling?
  • How can I make a room cooler when the sun goes down n the west when i already have thermal blinds n the window
  • Whats some good places to get high quality furniture?
  • do you have to prime the walls everytime you repaint?
  • I have been asked to submit floor plans by township for finishing basement. Can I do it myself?
  • How to Hire an Interior Designer ?
  • where can i find those picture screens that look like they are live like an LCD screen or something?
  • I'm painting my kitchen cabinets. The walls are mahogany wood. What color do u think the cabinets should be.