I want to project words surrounded by desk light on to a wall or floor What type of equip do I obligation?
Answers: If you want to project the words to outline for painting, afterwards rent an overhead projector. Print the words from your computer onto transparency paper (available at any department supply store) and lay that onto the projector. You can adjust the size of "print" on the wall very slickly.
You can also just print the words on plain dissertation, cut them out and then trace the outline on the wall... this can let go you some money.
You can rent an overhead projector and it costs about $40. Good luck.
If you want to use your computer to generate the words, you'll stipulation a projector that's compatible with your computer, and it'll cost you at smallest a few hundred dollars. The beauty here is you can modify the words using your computer and instantly see the effect.
Another likelihood is to use an overhead projector. This type of projector requires you print your material on a clear sheet of plastic, and the projector shines a flimsy through the plastic to display the image on the wall.
Without knowing exactly why you want to project the words on the wall, I can't steer you one course or the other.
You can also rent an opaque projector - heaps public libraries will let these out for a nominal duty. Opaque projectors do the same entity overhead projectors do, but do not require the use of a transparency. They will project directly off a printed page, on middle-of-the-road paper.
If your library doesn't hold such a thing or doesn't rent them out, contact department supply stores and/or blue print/drafting/art supply stores in your nouns, as well.
If you in truth want the words, themselves, to be in wispy, similar to the way laser pale shows are at planetariums, etc., I'm not really sure what to tell you. A home laser system is somewhat much, I'm thinking!! Still, you could experiment with a darkened room, a high-intensity wishy-washy source, and a shade with your words or packages cut out and see what you get. Maybe, near a little bit of adjustment and tinkering, you could craft something that would work.
Hope this help - good luck!
An thick projector is the way to budge. That is what we used in the sign business until that time the computerization became popular. You can find a failry inexpensive model from an art supply store. Try Dick Blick.
More Questions and Answers...