Texuring a wall that have wallpaper?
Remove, scuff up, or just start shooting texture on it?
Answers: you categorically have to remove your wall covering first but if the house be built back contained by the 90's i would pretty much guarantee that the walls where not prepared properly. contained by order for wallpaper to be removed confidently the walls first have to be painted next to an alkyd flat primer and i would bet that unless a profession paper hanger applied this thesis that was not done. for your sake i hope that it be because you may have a tough time getting it past its sell-by date. usually the top layer comes rotten not bad but when it comes to the aid it may not. first thing is to remove the top coat afterwards soak the backing. you can use a garden sprayer a spritzer bottle or of late a sponge. soak the backing and permit it sit, when it bubbles then it is equipped to be removed. you may have to soak it a few times. if in that backing doesn't come past its sell-by date then you may hold to rent a steamer and ever with that it is a long procedure. once the finance is removed wash the remaining soft mass off. patch and sand any imperfection with drywall reciprocated compound. then after that primer the areas to be textured near an alkyd primer undercoater.
To do it right remove paper. If composition begins to strip so does yor texture you just put up. Also the texture will own water within it which will loosen up paper and create bubbles underneath paper. Your unknown product is only have good as what your putting it on. The lone other option is to prime the tabloid cut out all nouns bubbles that pop out and all loose seam and spackle over them. Then texture.Peace,
More Questions and Answers...