When refinishing kitchen cabinets, how can I apply a glaze over the stain to add depth?
Answers:
You can make your own water based glaze with acyrilic or latex paint, Floetrol and water. Use a third of each. It can be ragged, brushed, sponged, or rolled over another water based product. Then seal with a good non-yellowing polyurethane, either spray or brush application. If you want an oil based product, you have to purchase that at the home improvement store. But, I have found as long as you sand down or use liquid sand to etch the surface of any existing finish on wood cabinets, the home made glaze and sealer work fine.
Other answers:
scumble glaze kit has intructions too, wall mart asda any decor shop
scumble glaze kit has intructions too, wall mart asda any decor shop
The best way to add a glazed finish is to use automotive spray paint (CLEAR) through a hired compressor and spray gun. It looks AWESOME though you will need to be patient and spray about 4-6 coats for a deep lustre finish. This product is also nearly 100% stain free so it only needs a wipe over with a wet smooth cloth to remove dirt.
Most hardware stores carry a product called DEFT. This is a clear coating for woodworking projects. DEFT can be apply by brush, rag, spray, etc.
I would suggest that you go to your closest hardware store, such as Home Depot, Lowes or Ace Hardware, and find more information on DEFT.
Good Luck