Can plaster and integrated compound be used interchangeably?
Answers: No. Both are different in makeup, and require different application technique.
plainly put yes, muds, mud.
No. They have different purposes which is why the
'ingredient' construct up also differs.
Its been awhile so this may not be correct.
I deliberate, I used joint compound to repair cracks surrounded by plaster. It is a stronger surface once it is hardened; however, it takes a couple of days to really solidify good. it cost more than regular plaster so markedly you would not plaster an entire wall / room with this product. Also, it be pretty thick so I used a considerable amount for the hole I be filling contained by. This again brings back the belief you would not want to plaster a large nouns with this alone. For cracks though, it is incredibly strong and a better choice than repairing with simply plaster.
I seem to remember also, here was "shrinkage" from the time i applied the compound until it in actuality dried - it shrank.
Setting plaster is commonly used to fill bigger voids or when you want to know how to apply several coats in a single morning. You can use either product to cover both screw holes and reciprocated tapes. You can choose the desired set time of setting plaster such as 30 min, 60 min, etc. I would not use integrated compound if I needed to fill surrounded by more than about 1/4" of compactness in one coat - dry time would be long and shrinkage and cracking would be expected.
More Questions and Answers...