Is at hand a upright businesswoman of driveway pavers and an effortless road to install them yourself ?
Answers: it might be better to have a cement driveway poured and stamped to look close to pavers. if you must do pavers, most will do fine, the labor is the hard segment, the trade-off in substance costs are for looks, complex shapes and natural materials are more expensive. preparation and underlayment for driveway are push button.
gravel 1st, sand on top, then pavers lying on that as instructed by paver manufacturer
Pavestone make nice pavers and there are usually instructions included beside them at Home Depot. Basically you level the nouns with sand, place the bricks the process you want them and use more sand as your mortor. I've done a patio next to them, but never a driveway. Good luck!
pavestone is good, but i prefer McNear brick and block, as for where on earth to buy, your local lumber yard/ home center should have them, or atleast be a supplier. Pavers are farly simple to install, the most momentous part is the foundation. Start near about 3-4 inches of platform rock, then compact that down to almost a 90% compaction rating, then 1-1 1/2 inches of sand, compact that down, and afterwards go to town...only make sure everything is smooth as you are putting down the pavers
More Questions and Answers...