I inevitability to raise some 600by 600 floor tiles short damagethey are on plywood floor beside tile adhesive/grout?
Answers: If you mean ceramic/slate type tiles, near is not any channel of saving the tiles minus saturating the plywood underneath for a few days until it swells and releases its bond, after the plywood is ruined. It would only work next to adhesives, not a mortar set type.
If you tight-fisted how to remove without wounding the subfloor [plywood], then a stiff floor scraper will do the trick.
I'll assume the 600 is within MM/CM measurements.
I agree with number one, within that damage is expected, no matter to what. You don't state the substance of "Adhesive", but without doubt a Floor scraper is the way to initially proceed no business.
I tile every day of my duration, and removing grout is a dusty, messy task, when consummate in a standard mode. To chisel grout is to risk tile damage anyway. If your intent is to salvage tile pieces, I suspect you should expect smaller number than 100 % success. Without a few more details the answers here will be relatively ambiguous, and perhaps not at adjectives satisfying.
Steven Wolf
a short time ago my two "sense"
Sorry, I agree with the other two answers. If they did a horrifying job of instalation originally you might seize lucky with a few tiles, but I would plan on shifting tiles. Take a good look at where on earth you want to lift the tiles. Could you stir to something completely different and make it a bright look?
More Questions and Answers...