Why does my earthen tile flooring maintain coming up?
i installed the floor myself using the hardybacker and a dutiful mortar mix.
Answers: idk......try using crazy glue...it works 4 me....lots n lots of crazy bonding agent.........
maybe the floor wasn't even before the mud be applied.
Yes, the stability of your pier and beam foundation can negatively affect your tile floor. The sponsor board is more about achieve a good bond between floor and tile and is not intended to override flexing in the foundational structure. Your sound out leads me to surmise that you believe that is the promising problem.
It could have be a half dozen reason, without seeing it, firm to tell.
Did you use a honest sealer before lay the tile?
Was the floor dry, clean and in position to tile?
Was the mortar to dry, did you "butter" the tile?
Was the floor perfectly even without lumps and bumps and, did you give up it dry completely before using?
I bring in sure the back of my tile is drizzly or, at least sticky.
Make sure the floor is not to dry.
Could be the thin set be too dry when it was laid if the problem is everywhere. If its single in sure areas its most likely the structure of the floor (joists) is giving some. Not exactly hazardous, but movement will pop-off the tiles.
To make repairs, chisel out the dried mortar underneath. Use FlexBond thinset, it is somewhat pliant and is more forgiving of movement than others. Use the right notched trowel to apply to the floor, then spread somewhat on the bottom of the tile, too, to aid in adhesion.
the floor is not strong plenty to support the weight. You will requirement to add more support beam underneath your house to prevent the flexing.
More Questions and Answers...