My obstruction requirements back... capably i necessitate give a hand?
Answers: The fence matter you are describing is made of polyvinyl chloride (PVC). This is a fence matter that is getting hold of popularity quickly and is available at most home advancement stores. While it is difficult to advise short actually seeing the problem, I can make a contribution a couple of general pointers. First, keep hold of in mind that most PVC barricade systems are made up of modular sections - i.e., the pickets and rails are usually pre-assembled and are installed as unit after the posts are installed. This fact may bound your options if you necessitate to 'lower' the fence to the ground. The point of the bottom edge of the pickets (or bottom rail) is usually determined while setting the posts, which own pre-cut pockets that receive the rails. If re-setting the posts at a lower elevation is unusable, you may be able to 'notch' the pre-cut guardrail pockets to allow for a lower finished elevation of the rail / picket assemblies. As the bits and pieces is, as you described accurately, plastic - cutting is done near relative ease. The home centers habitually offer tutorials free of charge to consumers who are interested within buying fence (or other) materials and systems . This probably didn't solve your problem , but I hope it offer some insight.
Best of luck,
Dad
Might be too late, but you should hold made a claim with your Homeowners insurance for that. Worth checking on.
More Questions and Answers...