How do you verbs or polish a concrete break room inside a building?
Answers: first apply with mop a dampen and all purpose soap solution without restraint. swing buff with a 20 inch buffer and a course 20 inch black wipe. Then remove the slurry with a showery dry vacuum. Than rinse mop with cold hose. Than apply three coats of concrete floor finish sealer with applicator or mop bony coats. at least a partly hour to forty five minutes between coats. Than apply some floor finish with applicator or mop. three coats partially hour to forty five minutes between coats. wohlaa about five hours subsequently you should have a nice shiny floor. state by sweeping and mopping with a nuetral floor cleaner. Periodically polish floor finish near a high sppeed contrivance and a burnishing pad. recoat when neccesary depending on how much traffic the room get.
pressure washing, or rent a floor polisher from your rental center.
More Questions and Answers...