Best place to hold a 2 foot diameter wooden circle cut?
Is at hand a store or service that either sell precut circles or makes them to decree?
Or would it be cheaper to just buy a saw to do it myself? And if so, What type of Saw would I entail?
Answers: It would probably be just as cheap to buy a cheap jig saw. Stick a pin or staple in a piece of wood, tie a interweave at both ends (at your desired lenght), and use a pencil to draw a perfect circle. Cutting it out is simple, using a jig saw. Another choice is contact your local High college and see if they have a wood shop class. If your project is for charity, they might do it for you for free.
Purchase a small Jig saw, mitt held type, $10 to $20
w/blades, cross cut type
measure surrounded by from the edge of the plywood 13 inches, and down 13 inches, Tye a small strong cord to the staple or screw,
measure 12 inches out, from staple or screw make a easy target,
wrap the line around a pencil , so it will be on the 12 inch splotch, keeping a slight pressure on the line draw a circle,
after cut it out,
around here we have several " Wood Mills" that will cut to decree for delivery or pick-up. The tax is very small too...
Don't own a saw? Now's a apt a time as any to buy one.
go to home depot, they flog them, its as easy as that.also, copious now hold saws you can use surrounded by their store if you need anything cut while you're near
More Questions and Answers...