Is within a approach to replace the doors on built within wardrobe?
Answers: Of course you can - measure the existing doors and ensure your unusual ones are the exact same size.
Not that difficult really
Anything is possible but without seeing them it strong to tell the best instrument.
Another option is to achieve a builder who specilises in home hanyman work to own alook and advise as it can cost similar to doing it yourself, depending on what is in reality involved
Yes of course it is possible to replace the wardrobe doors .Most of these doors will come bad with the removal of freshly a few screws which are on a spring hinge.
I would doubt however that it will be a standard size so that will be the fundamental issue
I suggest you look up your local paper for joiners who could do this work for not a large amount of money , and you should get a nice finish as capably.. It will still be less expensive than buying brand new free standing wardrobes , and you can also own the inside fitted out to your own spec.
A joiner can also look at how to adapt your other doors to gross sliding , but you may have a problem beside Fire regulations , especially if you live in England where on earth all spanking new internal doors need to be fitted beside springs to make them close automatically and eat up risk of fire spreading quickly.
Good Luck surrounded by the new house.
It would be better to enjoy a photo, but I do belive that all your option are possible. I am sure there is a local mill shop contained by your area that can wither build you a set of two of doors or purchase a set from a door manufacturer.
You should be capable of remove the wardrobe expecially if it is a built in Cabinet and replace the unbroken unit of you prefer.
You can tuning the doors to sliding doors but remeber that you will have smaller amount than half the passage clear at one time-
If the opening is one and only 30" wide, than that leaves 15" or smaller quantity of opening ( probably smaller quantity because the doors should overlap a little.
Good Luck
yes logically it is..
if you cant buy something of a similar size then label them your self from equivalent sized ply or mdf sheets.
More Questions and Answers...