How do you restain/revarnish a mahogany wooden round kitchen table?
Answers: 1. remove the varnish or plastic coat. Use paint or varnish remover. There are non-toxic types today and are safe to breath or hold children around.
2: sand down with 220 grit beside palm sander. Do not try to remove the old stain. Take your time not to label holes or round off the edges too much. Sand adequate to make it smooth near your hand. Hand sand adjectives the edges. Any holes or cracks... you can fill using the saw dust from the sand and mix it with pale glue and rub it within with your finger. Then a damp paper towel and wipe stale the clue or the stain will not stick. You never tell the difference.
3: Get Miniwax Mahogany stain. And foam brushes.
4: follow the instructions on the can. Use tack clothes to remove the dust
5: Apply even coats and hold it wet and use a cloth to feather the color from dry to drizzling area. Let the cloth give you the color and texture you similar to. Do a section at a time and rob your time, because the stain dries fast. Follow the small piece. Do not let it dry formerly you have it feathered or it will cake up and enjoy to start all over again. You hold to be an artist and create painting.
6. I recommend poly for the over coat so it will preserve spills and keep it verbs easily. Also is much harder for adjectives the abuse it get.
at your local home improvement center they hold products like homer formbys refinish kit , they are user friendly &are made for the do it yourselfers.
More Questions and Answers...