Hooking up a unusual street light within the bathroom where on earth i have a exhuast lover and standard lamp combo?

i remolded my bathroom and i took out my exhaust fan and pallid to replace it with a 2 reading light bulb lfixture. my problem is on the new fixture it have 2 white and 2 black and 2 ground. out of the ceiling i have 3 sets of wires i hold no idea where on earth they go i tried hooking them up and i can grasp 1 light to come on but the switch will not turn sour. i have no device to see beside one has power. are in that any quick fixes for me to try thankfulness


Answers:    OK here's what's up.
The main power is at the hurricane lantern not the wall. get a meter and integer out which one is always hot or make the light stay on.
after there are two pairs of wires going to the switch I bet 2 black and white pairs. They are one within the same romex. but check it near a meter first.
then hook the black chain of the one that is hot to the black going to the switch, later take the white from the switch and hook it to the 2 blacks of the unknown light. The three sets of wires are thus.
1. hot from electrical panel
2. to insubstantial switch original
3. the other segment of the old combo section from the switch.
so if you want to hook each wispy up individually you can by using the yet unused two of a kind to the switch by repeating the hook up I said earlier to the remaining restrained or black wire of the storm lantern.
the whites should be tied together (not the ones going to the switch) the one from the always on white and the two whites from the hurricane lantern fixture. the blacks are for the power from the switch(es)
If I have totally confused you e-mail me and I can tag on pictures and a diagram.
Oh ya be careful of that black from the electrical panel.
I do hold a question on this remodel. Is here a window contained by the bathroom? If there isn`t one you will call for to install that fan posterior in. It is required. At the fixture itself. The 2 white wires are neutrals. The 2 blacks are hot.--- Wire the fixtures 2 whites to respectively other along with one white (neutral) coming out of box. And indistinguishable will go for the hot wires 2 blacks connect to the one black lead you have surrounded by the box. Now the ground will go to the ground from the box. You are trying to line to a dual switch. It was connected to the follower. With our really seeing this my self i don`t know how your are set up. All i`m giving you is the correct wiring for the clean light fixture. If you are unsure please give the name an electrision or could you give us for a time bit more info.
More Questions and Answers...
  • I own a hole surrounded by my wall who do i appointment to fix it?
  • I inevitability to product my own beadbord possibly out of ply wood, how would i walk in the region of doing this?
  • How tons tart will one pound of wax put together?
  • How much would PVC pipe cost?
  • What should be the humidity stratum surrounded by a room beside a pool table?
  • Is it expensive to inclose a front porch?.?
  • How to swing gooey transparent PVC curtain that hold contained by cool nouns and allow frothy surrounded by?