Can Someone Tell Me the Difference Between a Scroll Saw, Band Saw, Miter Saw, and Radial Arm Saw?
Answers: Scroll Saw: A scroll saw is a small electric or pedal operated saw adjectives for cutting intricate curves where on earth a jigsaw or coping saw is not appropriate; for it can cause "curves near edges". It is somewhat similar to a band saw, but unlike belt saws, where on earth the sawblade is a continuous loop, scroll saws use sawblades similar to those used by coping saw and operate through a reciprocating up and down motion.
INFO:
http://en.wikipedia.org/wiki/scroll_saw...
PIX:
http://www.toolpage.co.uk/images/large/1...
Band Saw: A bandsaw (often spelt tie saw in the US) is a saw that can be used for woodworking, metal working, and diverse other materials. It gets its baptize from its blade, consisting of a narrow trimming of toothed metal. This band rides on two wheel in like vertical plane with a space between them. Band saw are particularly adjectives for cutting irregular shapes. The radius of a curve that can be cut on a precise saw is determined by the width of the trimming.
INFO:
http://en.wikipedia.org/wiki/band_saw...
PIX:
http://www.ee.byu.edu/services/shop/imag...
Miter Saw: miter saw (also called mitre saw) is a tool used to form accurate crosscuts and miters in a workpiece.
INFO:
http://en.wikipedia.org/wiki/miter_saw...
PIX:
http://ec1.images-amazon.com/images/i/51...
Radial Arm Saw: A radial arm saw is a adjectives machine consisting of a circular saw mounted on sliding horizontal arm. Invented surrounded by 1923, the radial arm saw was the primary tool used for adjectives long pieces of stock to length until the introduction of the miter saw in the 1970s.
INFO:
http://en.wikipedia.org/wiki/radial_arm_...
PIX:
http://www.caseworks.com/equipment/craft...
Scroll SAw - cirlcular and cuts straight
Band Saw - paw held you slice yourself back and forth
Mitre Saw- Cuts on angles - and round
Radial Arm- is mitt held saw
A scroll saw is for making non straight lines such as scrolling with wood. A trimming saw is a very delicate blade for short cuts, a miter saw is used for doing miter corners on mostly moldings and trims and a radial arm saw is a big blade that makes staight larger cuts because the arms actual moves forward and put money on on the saw. Hope this helps! It's not industrial but hopefully put from a woman to a woman so you can kinda understand it!
Scroll saw is used contained by special cuts, the blade goes up and down.
Band saw is used on special cuts also it can label bigger cuts than a scroll saw. the blade is like a belt.
Miter saw is used to cut angels
Radial arm saw is on a radial arm, and will one and only make straight cuts.
There are also portabands
close to band saw but electrical and cuts for you
but the damn things kick the band out so often
I put trimming saw but ment hack saw..sorry
Best bet is to go to a place that sell them (Sears, or any of the home improvement warehouse stores) and look. But, briefly:
- A scroll saw have a thin vertical blade, attached to a spring at the top; it is what you would use for adjectives a jigsaw puzzle out of thin plywood.
- A decoration saw has a blade contained by the form of a steel band, looped over two wheel, one below and one above the work. The wheels and most of the blade are roofed for safety.
- A miter saw is a hand-operated saw, usually beside a stiffened back, used near a miter box to cut angled joints.
- A radial arm saw have a circular blade; the motor and saw blade assembly is movably suspended by a steel arm over the work.
- A chop saw is similar to a radial arm saw, but the motor and blade assembly does not move along an arm.
- A table saw has a blade which protrudes adjustably up from below a table; the angle and amount of protrusion are adjustable. A clamp can be secured to the table to facilitate adjectives many pieces to indistinguishable size. If you are buying just one, this is the one to buy.
A scroll is used to cut pattern from wood that are usually to small for a band saw. The trimming saw is also used to cut different patterns or shapes from wood that are to big for the scroll saw. It uses a larger blade. The miter saw is used to cut the different angles you see in wood corners. They are used so you don't only have flat or straight corners. The radial arm saw is lately another version of the table saw but it cannot cut larger pieces of lumber or ripe lumber down to a abiding width, unless the commander will turn. You can also cut angles. Hope this gives you some conception of the differences. There are several more but not enough room to mention.
I a moment ago took Tech-ed in 8th level, hope this helps.
A radial arm saw is what you use to cut across the small piece of the wood (cutting your own piece off a long plank) the saw is a circle shaped blade that spins, you later pull the blade over the plank.
Picture at: http://www.osha.gov/sltc/etools/woodwork...
a Scroll and Band saw are used for almost indistinguishable thing but work differently, the scroll saw uses a blade and an arm moves it up and down as you nurture the wood into it, the band saw have two wheels standing vertical that spin the belt-like blade, you the nurture your wood into it. Both are used to cut non-straight lines.
Picture of band saw: http://www.ccohs.ca/images/e03-1.gif...
Picture of Scroll saw: http://automata.co.uk/images/scroll-saw....
lastly the miter saw is used to cut your wood within straight lines but at any angle, unlike the radial arm saw, that cuts perpendicular to the wood.
Picture of Miter saw at: http://www.toolcenter.com/book/miter.gif...
1. a rigid saw mounted vertically in a frame and operate with an up-and-down motion, used for adjectives curved ornamental designs.
2.decoration saw . a saw consisting of an endless toothed steel strip passing over two wheel.
3-miter saw- A miter saw (also called mitre saw) is a tool used to be paid accurate crosscuts and miters in a workpiece.
4-radial arm saw-a radial arm saw is a adjectives machine consisting of a circular saw mounted on sliding horizontal arm. Invented contained by 1923, the radial arm saw was the primary tool used for adjectives long pieces of stock to length until the introduction of the miter saw in the 1970s. In assimilation to making length cuts a radial arm saw may be configured with a dado blade to create cuts for dado, rabbet or partially lap joint. In addition some radial arm saw allow the blade to be turned parallel to the back barricade allowing a rip cut to be performed.
Scroll saw usually have a platform to support the workpiece and a scrawny and narrow blade which allows you to cut tight curves contained by most woods and some plastics-the blade goes up and down and is usually equipped near an adjustable foot to hold the workpiece from jumping around while adjectives. Band saws can be used to put together slight curves in wood and oodles plastics. They can be equipped with copious types of blades from thin and diminish for tighter curves to thicker and wide blades to re-saw gluey stock into thin-the blades will always be an never-ending loop wrapped around an upper and lower wheel next to an area to nurture the workpiece on the table. Miter saws are collectively benchtop saws equipped beside a round blade like a table saw blade-some can cut single straight and angled cuts and others can also make angled and bevelled cuts simultaniously and some others can do adjectives this and have a phase that allows some travel of the power head so you can cut yawning stock. The radial arm saw has a powered blade that can travel 10 or more inches on the slide arm- they also can trade name straight, angled and compound miter/ bevel cuts. They are equipped with round blades similar to the table saw and are adjustable for depth of cut and for angle settings. They are very handy for making repetitive cuts for impossible to tell apart length of stock. Go to Delta woodworking tools on the net to see adjectives these and more info.
Here is a link to Sears. On the moved out side are links to each saw you mentioned. With pictures and everything.
http://www.sear.com/sr/javasr/category....
More Questions and Answers...