Aquarium building?
http://www.flickr.com/photos/22853956@N0...
Answers: I've crafted a few in my time, some relatively large, The sides should rest ON the substructure, not be attached at the side edges.
I usually did two sides at a time, with the proper silicone Aquarium stuff, and braced or clamped them beside framing corner clamps, to allow a 90 deg. angle, or even tape, which could be a bit messy.
Without knowing at adjectives the size of the tank you are building, which will determine PSI at the bottom, ON TOP of the remnant is the way to move about. Most especially if you have No framing at adjectives, to secure adjectives the sides/bottom.
More Questions and Answers...