Correct way to hang greenboard?
Answers:
green side out so you can see it. and install it side ways. like it should come in 4x8 sheet, the 8 is long and the 4 is up. and screw it to the studs. lay the 8 foot long ways so you can find were you can secure it into. then the other piece on top of that, and you just line up the screws.
Other answers:
green side out.
it is chemicly treated.
plus the tapered edges for mud and tape are only on that side
green side out.
it is chemicly treated.
plus the tapered edges for mud and tape are only on that side
Yes, The "Green" side should be facing out.
The Greenside must be out to function for its intended purpose- Impervious to water.
green side out. if you cut a piece, put the cut edge up away from any moister, the sealed edge towards moister. use drywall nails or screws so you dont tear the paper