Toilet FLOODING!! HELP!!!?
Any tips to stop the flooding???
Answers: Turn off the marine supply to the toilet. It is valve on the supply dash which runs under the reservoir.
Push the plunger in the reservoir down so that it stop running into the toilet.
Cut off the wet, valve below the reservoir.
Call your dad.
Run to the store and get something, while you or your wife runs to the store cut stale the water so no more wet comes out.
There are two possibilities here. One is that the toilett floods because it is plugged in which bag a if a plunger doesn't fix it you will need to remove the toilet. Not difficult. 1.shut rotten the tap at the toilet (shut off) and remove the marine supply pipe from the toilet (an easy to remove nut). 2. Remove the two bolts at he bottom of the toilet and heave the whole toilet to move it aside while you remove what is plugging it. 3. you may inevitability a new wax trademark before you replace the toilet and bolt it put money on down. 4 reconnect the water splash to the shut off. 4. turn the shut sour on and test the toilet.
If this be not the problem and instead you have the toile overflowing when other sea appliances are used, mostly upstairs, then you enjoy a more serious problem. Your sewer is plugged. You will need any for yourself or for a plumber to use a "snake" which is a router to clear the line. You or he would involve access which could be from the hole where the toilet can be removed or in attendance usually is a "clean out" for this purpose. A verbs out is a pipe fitting usually prominently visible and near a large nut on the surface which when removed offer access to the sewer line(for the snake).
First and foremost, turn the water stale to the toilet. Look under the toilet for the spout. Second, go buy a plunger and plunge the toilet. If that does not work, you can find a snake that connects to a drill and try to snake it out. If that does not work, you will have to bid a plumber. Good luck!
More Questions and Answers...