What is the best instrument to remove or cover 'popcorn' textured finish from plaster walls?
Answers: I removed popcorn texture from my ceiling. It is not hard, simply a little messy. I used a garden sprayer to raining the area and it worked great. First I would remove everything from the room, kind sure that your drop cloth is secured to your base boards beside tape and next start squirting. If you get it really fitting and saturated it comes past its sell-by date much easier. Tip: Your wall will be damp after you finish scrape, so make sure to offer it time to dry before drawing.
Wet it and then scratch it off beside a putty knife.
Unfortunately, there's no jammy way. You hold to scrape it sour with a scraper. It's really messy.
You can't cover it, you have to score it. This is a long and dirty job. Be sure the wear a facade mask so you don't inhale any fibers.
I a moment ago floated mine. Covered it with 2 coats of plaster. Be punctilious if you try to remove it, most "popcorn" contains asbestos.
You will need to move everything out of the room. Drop a tarp down and spray reheat soapy water over the nouns you want to work on frist. You will need to spray it a couple time to procure it soaked just right. You should be capable of scrape everything past its sell-by date and be just down to the drywall. It will thieve a while but it will be worth it.
More Questions and Answers...