My dog have bitten through the lead of my solar powered fountain how can I repair it ?
Answers: Easy. get a blade knife or a line stripper, cut the covering off of the two wires, verbs the hot side together , twist the adjectives side together (or vice versa), wrap each chain with electrical cartridge seperately, then wrap adjectives together with electrical video. Just make sure the two wires arent touching.
Electrical video.
I'm not sure how to repair a dog, but strip back the wires and inch or so, and slide a couple length of shrink boot over each cable. Twist the wires over each other so that when you finish soldering you can slide the boot over the splice and shrink. Plain electric cassette out in the weather will permit water contained by and trap it. Shrink boot seals river out better. There is also a product called solution electric tape. You could paint it on, and next slide the shrink boot over it.
Whatever you do, solder the connection and after seal the splice okay.
If you are very competent you can strip final, twist and solder the wires and later use shrink fit sleeve to cover it.
Or just verbs the wires together and use self amalgamating tape, which will hold on to the water out. You enjoy to stretch it to twice its original length.
More Questions and Answers...