How can I replace the pull chain on my ceiling fan? Not the switch..the chain came out of the hole. Thanks.?
Answers:
Super glue won't work. You'll have to unscrew the bottom of the ceiling fan, most models are put together with a screw either at the top or bottom, AFTER shutting off the breaker that feeds electricity to this fan. Then inside you'll find the other end of the chain which will be very short & you'll see that it is attached by sliding the pull chain out of a groove just barely big enough for the beads on the chain. Once you've removed the short section, you can then slide the remaining length you have, if it's long enough(if not go buy one) & rescrew or bolt back together.
Other answers:
super glue!
super glue!
It the chain came completely out of the switch, the best thing to do is replace the switch. The switch is easy to replace. just be sure to get one with the same number of leads (wires).
well there all wrong so far so I will tell you how to fix it.. on the cap of the fan were a light kit should be there are screws take them out. then go buy the rplacement part from kmart or walmart for 2 dollars and you will see what part im talking about it is easy just take the old one out and change it for the new one its really easy. just turn off the switch first the power will be off for the fan then.