My Polaris in--ground pool cleaner continues to get stuck in a pool seating area. What should I adjust?

Answers:
If this is a new development, and the cleaner hasn't done it in the past, then look to the hoses. They get stiff with age and will actually "rudder" the cleaner head. If it is an on-going problem then you can adjust the thrust jet on the back of the head. Loosen the 2 screws and move the jet SLIGHTLY one way or the other. Ideally the backup valve should pull it loose, anyway. If you don't have one, get one.

Other answers:

can i see the plans of my house on the internet?

What gets off purple primer?

i have a brick wall that needs repair on the bottom how do i take out the bad brick do i shore up the top some

Any suggestions on how to get a squirrel out of the attic?

carb.settings for older briggs,rototiller?

How do I go about?

how do i reset my beko wma1715s washing machine?

I discovered 4x6 treated posts supporting my living room are rotting. What should I do? I plan concrete patio.

My home inspector missed something big!?