Installed clean thermostat and furnace doesn't turn on?
The hanger-on turns on as well.
Could I enjoy damaged the furnace by not shutting sour the power before I installed the topical thermostat by allowing wire to touch briefly?
I'm going to put the old-fashioned thermostat back on and see if the steam comes on.
How can I turn on the furnace manually, crossing a few wires?
The furnace is 22 years old, not sure if its electric or gas. Looks electric to me, I use fluent gas to heat the home and for the stove.
RTH230B is the unmarked thermostat. The only difference contained by the wiring is that the red jersey wire between Rc and RH terminal must be used in 3-4 cable installation.
Okay so I crossed the red and white wires, and the furnace kicks on and the airs seem to be warm. So immediately what???
Answers: Sounds like you enjoy it. Just make sure you are waiting long satisfactory for the heater to see on after selecting it. Also produce sure your temp setting is high plenty to kick on space heater. Some of the newer ones have a longer deferment before turning them on.
And whats the examine? Sounds like you figure it out
More Questions and Answers...