Replacing the timer on a hot tub washer...?
Answers: alright two scenerios (top loader or front loader)
TOP LOADER: if its a top loader, at hand should be two screws surrounded by the rear on both the gone and right side thatll pop the control panel up, if there not within the rear next there should be a trim on the vanished and right to remove these trims grab the top of the right trim, and verbs down and forward they will pop off and the two phillips screw will be on the bottom left and bottom right, heave the control panel and from there u can remove the timer.
FRONT LOADER: in that should be 2-4 screws on the support of the top panel in the backside remove the screws afterwards with a hurried jolt but not too knotty on each side slide the top to the rear in establish to disengage the top from the cabinet, from there you should see screw holding the front panel on, remove screws and from nearby replace the timer.
any questions or call for any other assitance feel free to contact me by email and ailing be more then joyous to help you out, carry me a model number and i can make this immensely easy.
If that's the trouble... It's trouble-free to replace. Pop the back stale.(about 6 screws).There will be a couple of wires from the motor and heater to switch. Two screw from the front holding it in position. straightforward...
More Questions and Answers...