We enjoy a rototiller engine mounted to a run pushcart. It is spewing grease, the pvc spout is impossible, how can we fix it?
Answers: I never hear of a small engine with a PVC spigot, what kind of engine is it? Are you sure it's not blowing grease out of the oil breather hose? If it is, any it is overfilled with grease or the piston rings are worn out or cracked.
Get the engine model and serial number off the engine, it is usually stamped on the metal engine shroud. Go to "outdoordistributors.com" and look up your engine model. You can than command the part you necessitate. Also, make sure that you are not overfilling the engine next to oil. I hold a mower that has the wrong dipstick and it is effortless to put too much oil contained by it. Assuming it is about a 5hp engine, it should with the sole purpose take roughly speaking 3/4 of a quart. It could also be that there is so much blowby that you are pressurizing the crankcase. In that covering new a tentative piston and rings might help it.
More Questions and Answers...