Frigidaire Dryer Bearing or Roller?
My sound out is do you think the reverse bearing or the rollers are worn out allowing the drum to enjoy slop in it or might it be another problem.
Thanks Gary
Answers: Neither, - Pop the top near a putty knife and remove a screw on any side to enable you to remove the front. Replace the worn rub strip (18" long) on the top of the door vent that the drum rides on and put it back together.
something is worn. could be rollers or the teflon glides.
It must be a roller controls. as in I doubt you enjoy one any more with that much play. This dryer isn't deafening? I would think it would trademark a lot of crack. I would be careful just about running this until you get it fixed or replace it.
Not singular could you have a roller beside a worn inner sleeve bearing, but there's a accurate possibility that the front drum seal is worn out, that would allow the play and movement within the drum. Could get expensive.
More Questions and Answers...