Saving my latest flooded gas furnace? Still beneath dampen. Suggestions? TIA?
Answers: Plain and simple, your answer is “no” what you hold there in a minute is now call scrap metal. You will not find a HVAC professional anywhere that will suggest that you form any attempt at reusing anything on that furnace. You might safely salvage a few sheet metal screw, but that’s about it.
Sounds alarming to use a gas furnace that has be under river. The heat exchanger will probably rust and crack letting carbon monoxide into your house.
hopefully you hold flood insurance, if my furnace, I would call hvac company and enjoy them check it. If dry, it might be fine, but are you willing to bet condition and home on it?
You need to send for a furnace cleaning and maintenance company and own them look at it.
I have some friends contained by New England who went through similar problems contained by the flooding last spring and their exotic furnace was unsafe to use when it happen to them. Theirs was simply a few months old when it be ruined...that's a big ouch.
You may have a small destiny of being competent to completely dry it out...but I would definitely check out of it to an expert.
You would not be saving yourself anything within either funds or aggravation if trying to salvage a furnace cause a fire or explosion in your house.
Sorry to hear nearly the flooding, many empire are suffering through this. I hope that your family is fine, textile things are replaceable but people are not.
There is probably a great deal of damage already. Also most manufacturer warranties will not cover anything due to the flooding. Before you buy another component, check out www.hvac-for-beginners.com . There is a lot of great info nearby.
NEVER use any electronic parts that's been raining. They may send a false signal to gas tap and never shut off or start gas valve minus a pilot or ingnitor being on to lite the gas.
Definitely no for the gas tap and the all the electrical including the electronics. I go through a hurricane about five years ago. I be working as an HVAC technician then and go through many different types of flooded HVAC equipment. Many of the boilers be salvageable as long as all the controls (including gas valves), electrical devices resembling pumps including all the electrical system was replaced. Insulation and refractory have to be replaced also. Boilers are tough because many of them are make iron inside however a furnace is all mostly sheet metal. Inside the combustion chamber when the fire is burning surrounded by a regular furnace corrosive gases are condensed and some of these condensed gas cause (over time) rust of the flue system and the exchanger. So a moment ago because the exchanger has be under wet does not mean it is going to rust out anytime soon. Many are made to withstand a corrosive environment. I would enunciate have it checked out by a qualified HVAC contractor. Most probable they are going to tell you that you inevitability to replace it but if you choose to rebuild they will expected not give you any warranty on the recreate. The safest thing to do is to replace it. The most cost successful way to do it is to go back to the beginning it. I always lean towards safekeeping first. If you choose to rebuild it take home sure you have carbon monoxide detectors within your home.
More Questions and Answers...