I want vertical grease free electic nouns compressor to blow out sprinkler and contained by ground pool lines suggesstios?
Answers: You will need to dance back to the control box and "Tee" into the principal line lately on the sprinkler side of the main shut past its sell-by date. After you install the "Tee" fitting you will need to install a womanly air connector. (the womanly connector is a self-sealing fitting)
Then make a "Double male" fitting to connect the appendage of your air hose to the womanly fitting just installed contained by the sprinkler line.
When you will to evacuate the sprinkler lines, close the main inlet tap, start with a container pressure of less than 30 PSI. (you do not want to put 100psi on wet lines!) you should have plenty air within tank storage to push adjectives the water out of the underground lines.
Hope this is what you needed!
More Questions and Answers...