How do I install a TV hook-up in my bedroom?
Answers:
ok, this will take a few tools and a bit of know how. you need some screw drivers, a drill with a 1/2 inch bit( + or - a small amount) a snaking wire(gotten at any hardware store) electical tape. i realy cant help you too much because you have given me very little important info. tell me stuff like, is it on the first floor? do you have a basement and/or atick? you know, the idea is that you run the snake wire through the wall to the nearest virical point from the cable hook up. you then run it the rest of the way on the ceiling or floor. you may want to find a friend that knows how to do it because i cant tell you exactly how to do it unless i can see it and actualy figure out how it should be run.
Other answers:
Simple. purchase a splicer and a cable wire long enough to reach the desired spot at local electronic store such as Radio Shack or Best but. Run a cable from the cable hook up into your room and connect it to the TV. You might want to drill a small hole in the wall to run the cable through. If you choose to you I suggest purchasing 2 face plates to cover up the hole. You can get face plates at such places as Home Depot.
Simple. purchase a splicer and a cable wire long enough to reach the desired spot at local electronic store such as Radio Shack or Best but. Run a cable from the cable hook up into your room and connect it to the TV. You might want to drill a small hole in the wall to run the cable through. If you choose to you I suggest purchasing 2 face plates to cover up the hole. You can get face plates at such places as Home Depot.