Can an electric power washer be used next to an extension cord? If not, why not?
Answers: Small rope cords will cause a voltage drop and can burn up the motor contained by the power washer, voiding the warranty. A larger cord will not cause a voltage drop. You obligation to know the amps required by the washer.
A cord 100 feet long will make available you this many amps short a serious voltage drop:
#10 12 amps at 120 volts
#12 8 amps at 120 volts
#14 5 amps at 120 volts
most heavy duty cords are #14
We use an extension cord beside the electric power washer and have never have any problems.
Any 14 or 16 gauge extension cord should work.
Unless they enjoy 500 ft cords attached to them, you would most certainly hold to use an extention cord with one at some point.
On the box, previously you buy it, it should tell you what guage you would entail. If not on the outside, then contained by the owner's manual.
Electric power washers will draw 10 to 14.5 Amps; for this object your power washer must be connected to a dedicated outlet (meaning one outlet with the sole purpose to the 15 Amp breaker)
It is NOT recommended to use any extension cords with powers washers but if you must, you must use a cumbersome duty gauge cord and minimize all along cord.
Maximum lenght of 50 feet near a gauge of 14 AWG
Using an extension cord beside an electric power washer will cause the component to draw much more power due to line loss within the cord. The unit and cord will steam up; the power washer can actually take into custody on fire.
They recount you not to use an extension because people will use any cord they hold available. The unit will obligation a heavy determine cord. They draw a lot of amperage and if you don't enjoy adequate lead it will, heat up, incentive the motor to run slow and overload the circuit. Get a good commerical status heavy duty extension cord and it should work only fine.
More Questions and Answers...