Is it risk-free for my kith and kin to stay contained by the house when a vinyl tile flr (basement) containing asbestos is removed?
Answers: The contractor must hire a licenced firm to take out the tile and dispose of it. If he does it by himself lacking a licence, you should fire him and probably report him. You cannot be in the house while the work is adjectives, but a qualified crew shouldn't need more than a couple of days to finish a home career. After the work is done, there is no problem person in the house. The in one piece point of having a company come remove it is that it is gone! There will be no dust or any other traces of it if they do their available job right.
I worked for a school district and several buildings have asbestos in them, including the vinyl floor tile. The asbestos be used as a lubricant during the manufacturing process. It's really rather an amazing material besides the bloodshed people subdivision. The problem lies in the inhalation. Small particle enter your lungs and cause tiny cuts inside the lungs themselves. These will alleviate, but it is impossible to remove the particle so coughing and sneezing move them about cause more damage over and over. The asbestos contained by tile is not "safe" but is not a threat unless it is drilled or pulverized in some style. There are thousands of buildings across the country with this same tile and within are no concerns except for those mentioned. After it is removed, live in your house beside no concerns for the asbestos
have you gona barmy?! of course it isnt sheltered for your family to stay! asbestos is poisonous chemical..even the people who remover it hold to wear insulated suits with full protection. that stuff is dangerous!
Make sure your contractor hires a licensed asbestos abatement crew. You should be fine to stay in the house since a qualified crew will close in the area and examination the air earlier they break the seal on the space.
This is one of those things you should not try to skimp on.
That should be moderately o'kay,as removal method,must keep the asbestos stuff damp, for removal. Providing that it is watery,there is no hazard,as the asbestos particles cannot draw from into the air.
If they don't ripe it out you are ok, but as soon as they start taking it out you own to get out of the house and stay out until it is completely removed, this stuff is vastly dangerous, it can incentive a lot of pulminary problems as in good health as potential cancer.
No.
Yes it will be perfectly safe and sound. The asbestos abatement crew will not allow the asbestos to become airborne. Asbestos is completely harmless unless inhaled into the lungs. Asbestos surrounded by floor tile is not friable, that is, it will not float around within the air to be inhaled.
i would check next to the county permit, slot, vinyl tile is what they call
non friable, don,t see why you necessitate an asbestos abatement crew for this, just to remove a second floor, when the tile is within the basment,? I would question this,
What does he right to be heard? They usually enclose the nouns to be done.
If your contractor is not a licensed abatement contractor, he SHOULD NOT be removing the floor tile unless your Dept. of Environmental Quality and/or your County dept say the number and type of material is exempt. There's deeply to know about asbestos abatement, and the average contractor should not do this in need Asbestos Worker certification.
Is the removal hazardous? It depends. If a licensed abatement contractor is removing the tile next to a good negative-pressure containment OR they are using intact methods of removal (like dry rime, heating, etc) later you should be fine to stay in the house. Floor tile does not tend to release fibers into the upper air as long as it's not sanded, abrade, drilled, or broken up. 15X20 feet is not much tile any.
Since you're remodeling your house, I would get an environmental consultant to conduct a remodel asbestos survey to ensure other asbestos-containing materials aren't self impacted, such as plaster, gypboard, joint compound, spray-on ceiling and wall texture, etc. Those materials are much more likely to release airborne fibers.
More Questions and Answers...