How to Use a Pressure Washer ?
Answers:
First, hook the hose to the pressure washer. Hook the pressure washer to the facet. Turn on the facet. Pull start the pressure washer. This should work like a mower 2 cycle engine.
Use the gun part and pull the trigger. Hold the end of the gun about 2 inches away from and HARD surfaces, like brick or concrete. Increase the distance with the fragility of the surface, glass for example needs to be at least 2 feet.
It is better to brush in some cleaning solvent before using high pressure water.
Other answers:
POINT NOZZLE AND PULL TRIGGER
POINT NOZZLE AND PULL TRIGGER
Look at Lowe's website. It depends what you want to do with it.
Hook up water to water inlet. Assemble nozzle and hook up to water outlet. Turn on water supply. Hook up to electric supply and switch on. The pump should now operate when you pull the nozzle trigger and shut off between.
Generally hold the nozzle 10 - 20cm from the object to be washed and work across it. Careful with cars - thin panels can be bent and trim can be removed if not careful.
1. put water in tank(s) 2. turn the mooter on and point and pull up on the little handle